InternetCloning.com is a participant in the Amazon Services LLC Affiliate Program. It is an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
(as of Oct 16,2020 14:16:11 UTC – Details)
2020 NEW DESIGN:
The New Wireless Waterproof computer feature solar energy system to provide extra power.With accurate tracking on speed and distance helps you to get more fun of your cycling trip or easily achieve your fitness goals.Please enjoy cycling with this wonderful gadget in the breeze and sunshine to feel your speed!
– Solar Power
– Memory Function(all the data won’t be lost even you change a new battery)
– Speed Tendency, Current Speed, Max Speed, Average speed, Speed Comparison”+”or ”-”
– Riding time, Clock, ODO Meter, Distance
– Backlight（press both button to keep the light on）
– Calories Lever(CAL)
– Low Power Indicator(Remind when the battery is low)
– Auto Sleep and Wake Up Mode, Scan, Auto Sleep Mode
– Miles Setting (KM/hr,M/hr Setting)
– Wheel circumstance Setting(0-9999mm)
SIMPLE STEPS SETUP
Install Batteries(Please remove the battery conver before installation.Positive pole(+) should be set upwards)Reset and Pair the computer prior to first use in order to achieve the most accurate resultsInstall the Bracket Mount the SensorMount the magnetsSet the computer into the Bracket
Note: Pay attention to the distance among the speed magnet,cadence,magnet,and sensor
1*Computer unit / 1*Bracket / 1*Sensor / 2*Rubber slice / 1*Magnet / 2*Plastic strap/ Plastic Strap/ 2*Batteries
HOW TO INSTALL SENSOR AND MAGNET ( IMPORTANT – wrong installation will make your computer can not receive the data from sensor)
1. Make the sensor and magnet in the lower position ( in front wheel)
2. * Make the side of the sensor face to the magnet ( not the side with the battery cover)
3. Aligh the center of the sensor with the center of the magnet. *Keep the distance of the sensor and magnet less than or equal to 3mm
HOW TO INSTALL THE COMPUTER, SENSOR & MAGNET
We’ve uploaded the video in the Amazon website of the product.
Before installation, please open the electromagnetic over of the sensor/ computer and take off the battery protective film. Then make sure you’ve closed the battery cover of the sensor/ computer to make the battery fully connection.
The order of installation is not mandatory, and it does not matter if the order of installation is different.
1.Install the bracket on the handlebar
2.Fix the bicycle computer on the bracket
3.Mounting the magnet( fixed in the spokes)
4.Install the sensor( fixed on the front fork)
NOTE: As much as possible to install the sensor and magnet as low position of the front wheel as possible to ensure accurate data.
Make sure the Smooth side of the sensor towards the bicycle spokes, the side with the battery cover towards the outside.
5.Aligh the center of the sensor with the center of the magnet. Rotate the sensor to adjust the distance between the sensor and the magnet so that the distance can equal to or less than 3mm
HOW TO SET UP THE COMPUTER
First, install the battery of the computer, then you can see four numbers in the display, the rightmost digit should be flashing.
To change a flashing digit: Press Right button for as many times as necessary until you see desired digit. Then each press Left button to go to next flashing digit. Proceed in the same way for each of the four digits. When finished with the last digit, press of the Left button to go to the next computer setting – Mileages Unit Setting
2.Mileages Unit Setting
Press the right button to change the miles unit. Then press the left button to go the next computer setting – age and weight
NOTE: If you set the unit for M, the default unit of the weight is pound, if you set the unit for KM, the default unit of the weight is kg
3.Set age and weight
The setting ways of the age and weight is the same to the circumference.(The number at the top of the screen is the age, and the number below is the weight.）When finished with the last digit, each press of the Left button to go to the next computer setting
4.Set the mileage maintenance value
The default value is 0200. Press the right button to change and press the left button to set
Change Mode – Press Right button
Change battery won’t delete the set information.
If you want to reset, press the right button and left button for 6 seconds in the same time.
How To Set The Time
In the clock mode, press the left button for 3 seconds then you’ll enter the clock setting interface. First set the system, the default is 24-hour system, press right button to change it to 12-hour system if needed. Then press the left button to go to the time-minute setting： Press Right button for as many times as necessary until you see desired digit. Then each press Left button to go to next flashing digit. Proceed in the same way for each digits.
How To Delete The Data
In the corresponding mode, press left button for 5 seconds to delete the data.
【2020 NEW DESIGN – SOLAR ENERGY】:With solar panel ,It can automatically charge in the sunshine or light,provide extra power to the computer while built-in 2 batteries to keep your ordinary electricity need.Environmental protection, Extend battery service life and Save your money. When mounting with the battery of the sensor, please pay attention to points of the power connection.( press the iron piece to make the battery and equipment fully contact)
【MULTI FUCTIONS AND WIDE APPLICABLE】:Built-in 22 functions,works well to measure speed,distance,riding time calorie counter and etc which what any serious bicyclist or fitness fanatic needs.Small size ,lightweight and wireless design make it suitable for most types of bicycles(may not suit for some type with large spokes)
【AUTO SLEEP FUNCTION】：After no signal inputs of 300 seconds, the screen will go into a standby sleep mode with LCD displays. When you shake it or any signal is inputted or any button is pressed,this cycle computer will automatically wake up
【WIRELESS & WATERPROOF DESIGN】:Wireless and Waterproof Design makes it more convenient and durable.Never worried about the complex in install the wires on your handlebars,No need to worry about rain.Simple installation that only takes a few minutes. Easy to navigate interface with only two buttons to access all measurements.JUST ENJOYING YOUR RIDING
【DAY & NIGHT BACKLIGHT】:Provides backlight and large LCD display for easy viewing during dark hours.The backlight will automatically turn on for 4 seconds per time between 17:00 and 07:00,press both button to keep the light on